Our Photo Garden panels are extremely easy to install.

Rigid, a straight forward process is required to install Rigid.

Step 1 Mark the panel where you wish to put the screws and drill a small pilot hole.

Step 2 Offer the panel to the wall and then re mark the wall through the small pilot holes. Take away the panel.

Step 3 Drill and plug the wall where the marks are. Once you have all your desired holes plugged. Simply offer your panel pack up to the wall, locating the hole with the plugs and then simply screw the panel to the wall.

Flexible, again a straight forward process is required to install Flexible.

Step 1 Mark the wall where they eyelets are.

Step 2 Drill and plug the wall where the marks are.

Step 3 Place washers over the eyelets and screw the flexible Photo Garden Panel to the wall.

Sit back and admire the transformation of your garden with your new Photo Garden Panels.